The short answer
A chimney cap keeps rain, debris and animals out of your flue, and a chase cover seals the top of a framed chimney so water doesn't rot the structure. If you see water in the firebox, hear animals, or notice rust or white staining, the top of your chimney likely needs a new cap or cover. SummitHearth inspects, measures and installs caps and chase covers that fit your flue.
A chimney cap and a chase cover close off the top of your chimney. The cap sits over the flue opening. It keeps out rain, leaves, birds and squirrels while letting smoke and exhaust escape. The chase cover is the metal top that seals a framed chimney chase, the boxed-in, sided chimney common on additions and prefabricated fireplaces. When either one is missing, rusted or the wrong size, water and animals get in, and the damage spreads from the top down. SummitHearth installs and replaces chimney caps and chase covers on homes across Brooklyn and nearby neighborhoods. That includes brownstones and rowhouses with flat roofs as well as frame houses with sided chases. Our technicians are certified, and every job starts with a look at the whole chimney top, not just the cap.
Signs you need a new cap or chase cover
Most homeowners call us after something shows up inside the house. A bad or missing cap is hard to spot from the street, but its effects are easy to see once you know where to look.
Any one of these is worth a look. Two or more together usually point to a problem at the top of the chimney.
- Water in the firebox, a rusty damper, or a puddle on the hearth after a storm
- Animal noises in the chimney, such as scratching, chirping or fluttering, often in spring
- Debris or brick flakes in the firebox, including twigs, leaves, nesting material or bits of flue tile
- White staining on the brick outside or around the fireplace, a sign that water is moving through the masonry
- A smoke or creosote smell that gets stronger on humid or rainy days, when moisture mixes with deposits in the flue
- Poor draft or smoke rolling into the room, which can happen when a nest or debris partly blocks the flue
- On a framed chase: rust streaks running down the siding, or a chase cover that sags and holds standing water

What's included
If we find damage a cap can't fix, such as a cracked crown, broken flue tiles or a failing liner, we'll show you and explain your options. Nothing extra is done without your approval.
- Roof-level inspection of the existing cap, chase cover, crown and flue openings
- Measurement of every flue so the new cap fits the tile or liner it covers
- Removal of the old cap or rusted chase cover and any loose debris at the top
- Clearing of nests or blockages we can reach from the top of the flue, after confirming no animals are still inside
- Installation of a cap with a mesh screen that keeps out birds and small animals and still lets exhaust out
- For framed chases, a new chase cover with a sloped or crowned surface and a drip edge, so water sheds away from the siding
- Sealing and fastening the cover so it stays put in wind
- Cleanup of the firebox and smoke chamber for anything that fell during the work
- Photos of the chimney top before and after, plus notes on any other issues we saw
How we work inside your home and on the roof
Inside, the crew lays drop cloths from the door to the fireplace and covers the hearth before opening the damper. HEPA vacuums run during any work that could stir up soot, so dust stays in the firebox instead of drifting into the room. If a nest or heavy debris has to come down, we clear the flue with rotary brushes. When we need to see the flue walls or confirm the passage is open, we run a camera up the chimney.
On the roof, the crew uses ladders and safety gear suited to the roof type and pitch. Flat roofs on rowhouses and brownstones are usually simple to work on. Steep, slate or shingle roofs take more setup. We protect the roofing around the chimney, keep tools and old parts contained, and clean up before we leave.
The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels:
Level 1 is used when nothing has changed. Level 2 is used when the system changes, such as a new appliance or a switch in fuel, or when the home is sold. Level 3 is used when a hidden hazard can only be reached by opening part of the chimney or the building.
A cap replacement on an unchanged system normally goes with a Level 1 inspection.
If your building recently converted its boiler from oil to gas, the chimney has to be evaluated as part of that work in New York City. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue. In that case, the cap has to be sized to the new liner.
Time for your annual chimney check?
What affects the price
We don't quote a price before seeing the chimney, because the job depends on what's up there. These are the main factors.
You'll get a written estimate after the inspection, before any work starts.
- Chimney height and roof access, including roof pitch, roofing material, and whether the roof is reached from a hatch or by ladder
- Fuel type, since wood, gas and oil flues can call for different cap styles and materials
- Flue size and condition, and how many flues share the chimney top
- How much buildup or nesting material has to be cleared before the cap goes on
- Whether a camera inspection or repair work, such as crown patching or flue tile repair, is needed
- For chase covers, the size and shape of the chase and whether a stock cover fits or a custom one has to be made
How a visit works
When you contact us, we'll ask what you've noticed and what kind of fireplace or heating appliance you have. We'll also ask how the roof is reached. Then we schedule an arrival window.
When the crew arrives, they set up floor protection, check the firebox and damper, and then go to the roof to inspect and measure. Next, we go over the photos with you and explain what we recommend. If you approve, most cap installations are finished during the same visit. Custom chase covers are measured first and installed on a return trip.
New York City's heat season runs from October 1 through May 31. During that time, building owners must keep apartments heated to the city's minimum temperatures. If you own a building with tenants, late summer and early fall are a good time to fix the chimney top before the boiler runs every day.

